There are varying qualities of secateurs from budget to professional quality but why are there different types of blades fitted to secateurs?  Usually, the range extends from bypass (or parrot-beak type), anvil, and double blade.

What else to look for when choosing the right secateurs?

Everyone has a different sized-hands and secateurs are made in a facade of different sizes and shapes. ?Feel the secateurs in your hands open and close them like you are making a cut and feel if your hand can extend the reach of the handles when open. ?Rolling handles may be an option or not. The rolling handle model are usually more expensive and may not be better for the fit of your hand.

Here are some other facts about secateurs:

• The maximum cutting capacity of secateurs is usually around 20mm up to 25mm depending on the robustness of the secateurs.
  
• Keep them sharp, no secateurs will give a good or easy cut if blunt.
• Professional grade secateurs are slightly more cost upfront but give you the flexibility of replacing almost any part of the secateurs. ?The blades like Lowe from Germany are hardened twice and heat treated. ?So you get more mileage out of them. ? Also, professional-grade secateurs are made with alloys and tend to be lighter and easier to use for extended periods of time.
  
• Budget secateurs are made to be disposable, they are usually much harder to cut within any model and tend to jar the worst.
  
• Secateurs should have a grip handle so if you are pruning and your hands are wet then you still need to have a good grip on them.
  
• Keep your secateurs clean and oiled. ?One sure way of spreading disease in any grove or orchard is to prune a diseased tree then move onto healthy trees. ?Dip your secateurs in a 25% diluted methylated spirits solution. ?Oiling the blades after you have finished for the day will keep the secateurs in the best condition for longer.
  
• The importance of a good clean cut can never be overstressed!
  

The next time you look for secateurs, take into consideration the application and frequency of use. ?Choose what is comfortable and practical for your application!

More about:

08/11/19:? Pruning techniques and timing are always a misunderstood practice throughout the olive growing community.? This study is interesting because it delves into simulated mechanical pruning and also introduces the potential use of plant growth regulators.

Pruning is a necessary grove management practice to assist in maintaining appropriate canopy size and promote higher levels of flowering in olive groves.? Recent studies assessing the agronomic responses to mechanical pruning have found that moderate to severe winter mechanical hedge pruning can result in a vigorous vegetative growth response the next season which could reduce subsequent flowering for up to three seasons.

The latest research out of Argentina highlights a potential direction in findings that plant growth regulators need to be assessed in its use for increasing fruit yield.

The study looked at the different techniques for the impact of increasing flowering and fruit yield which included:

• Tip heading of new shoots
• Thinning of vigorous new shoots
• Application of growth regulators - Mepiquat Chloride (MC)

Researchers noted ?The thinning of the new water sprouts at pit hardening 4 months after the simulated mechanical winter pruning reduced tree size and improved the return flowering and yield but is time-consuming.? Whilst tip heading was not effective in controlling shoot growth nor promoting flowering on new shoots.?

?The encouraging responses to plant growth regulator on unpruned trees indicate the need for further studies combining winter pruning with MC applications in the 2000?3000 ppm range at pit hardening and at other phenological stages and for several consecutive years to confirm whether this practice is a better post pruning management tool."

This research is interesting because the use of plant growth regulators could become an important tool for improving flowering and fruit yields.? With the current drought conditions looking at alternative techniques to improve fruit yield could be a game-changer for the Olive Industry and should be explored.

_____________________________________________

Responses of Shoot Growth, Return Flowering, and Fruit Yield to Post-Pruning Practices and Growth Regulator Applications In Olive Trees

Abstract

Winter mechanical hedge pruning of olive trees can result in a strong post-pruning shoot growth response and a low return flowering intensity the following year. However, post-pruning practices including tip heading, water sprout thinning, and the application of the growth inhibitor mepiquat chloride (MC) may positively reduce subsequent vegetative growth and promote flowering. Two experiments were carried out with the aim of addressing the following questions: (1) Do these post-pruning practices applied on trees that received simulated mechanical pruning during the winter reduce growth and increase flowering in the spring of the following year?; and (2) What is the optimal MC dose in unpruned trees needed to increase flowering the following spring? In the first experiment, five-year-old olive trees (cv. Arbequina) growing in a fairly low-density orchard (208 trees ha^-1) were hedge pruned at the end of winter using manual clippers on the east and west sides to simulate mechanical disk pruning, and the post-pruning treatments were applied at the pit hardening stage (early summer). In the second experiment, foliar or soil application of MC was performed at pit hardening in unpruned trees. The results show that tip heading of new shoots led to a large number of lateral shoots that flowered little, or not at all, the following spring. In contrast, the water sprout thinning treatment had sufficient flowering to significantly increase fruit number and yield the following year compared to tip heading. Foliar application of MC (1500 ppm) after winter pruning did not inhibit new shoot growth, return flowering was low, and yield was less than the water sprout thinning treatment. The lack of a post-pruning response to foliar MC was likely related to the dose used (1500 ppm). In the second experiment, a foliar application of MC at 3000 ppm was associated with greater return flowering and yield than the untreated control. In conclusion, thinning of vigorous water sprouts at the pit hardening stage three months after simulated winter mechanical hedge pruning can improve fruit number and yield the next year, especially on a per canopy volume basis. Furthermore, the responses to foliar MC application in unpruned trees suggest that more detailed post-pruning studies with MC application doses in the 2000?3000 ppm range and at additional phenological stages should be performed over several consecutive years to assess whether this practice could be a suitable management tool.

Results The effects of water regimes on the plant water status, photosynthetic performance, metabolites fluctuations and fruit quality parameters were evaluated. All DIS treatments enhanced leaf tissue density, RDI and SDI generally did not affect leaf water status and maintained photosynthetic machinery working properly, while SDIAF treatment impaired olive tree physiological indicators. DIS treatments maintained the levels of primary metabolites in leaves, but SDIAF plants showed signs of oxidative stress.

Moreover, DIS treatments led to changes in the secondary metabolism, both in leaves and in fruits, with increased total phenolic compounds, ortho-diphenols, and flavonoids concentrations, and higher total antioxidant capacity, as well higher oil content.

Phenolic profiles showed the relevance of an early harvest in order to obtain higher oleuropein levels with associated higher health benefits.

Conclusion Different treatments (or curing methods) that are necessary to remove the bitterness of the raw olive and to stabilize them to obtain edible table olives, causing a loss in phenolic substances which also results in a loss of anthocyanins and antioxidant activity. However, CdN black table olives were the richest in polyphenols, consequently possessing the best antioxidant activity among the analyzed black table olives and among other black table olives reported in literature.? Moreover, it is plausible that regular consumption of CdN table olives can give real returns in terms of prevention of oxidative stress.

Authors: V aleriaAlbarrac?n^a1, Antonio J.Hall^b, Peter S.Searles^a, M. CeciliaRousseaux^a

• a Centro Regional de Investigaciones Cient?ficas y Transferencia Tecnol?gica de La Rioja (CRILAR-Provincia de La Rioja-UNLaR-SEGEMAR-UNCa-CONICET), Entre R?os y Mendoza s/n, Anillaco, 5301, La Rioja, Argentina
• b IFEVA, Facultad de Agronom?a, Universidad de Buenos Aires/CONICET, Av. San Mart?n 4453, Buenos Aires, C1417DSE, Argentina

Read the full study at Scientia Horticulture

The Objectives of Pruning?

By Marcelo Berlanda,?Agronomist & Consultant for The Olive Centre

?It is a fact that to produce fruit, olive trees need to grow and produce new branches each year?

Once the trees have reached their optimum canopy volume for the environmental conditions of the area, it is likely that the yields could start declining. This is due to the fact that the inner part of the canopy does not receive sufficient sunlight, which causes defoliation, resulting in a low Leaf to Wood Ratio.

If the tree grows above its optimum size, it creates serious issues for the harvester machines.? The tree becomes too high and too wide for the machines, it has thick branches which can cause damage on the picking heads and also reduces removal efficiency of the machine as well as slows down the overall harvesting speed.

It is a fact that to produce fruit, Olive trees need to grow and produce new branches each year; therefore the trees need to grow every year. It is here where pruning becomes a very useful management tool.

Pruning helps increase Fruit Size, Oil Yield, Light Interception, and Leaf to Wood ratio, it promotes new growth and reduces water and fertiliser requirements.

1- Tree Training

Timing: training takes place during the first 3 years of tree life.

On the second and third year the aim is to remove lower branches below 600-700-800-1000mm (must be done gradually)?

There must be a balance between what is taken out and what is left on.? If we remove too much canopy, we have a negative effect on the tree, because we are removing photosynthetic area setting the tree back for a while until it starts growing again.

Light pruning is a process by which we only take a small amount of foliage (a couple of small branches), therefore we are not affecting tree balance. That is why it can be done from August until the end of May.

Heavier pruning in this process we take large amounts of foliage therefore we are promoting a stronger reaction from the tree, this makes it susceptible to frost damage. That is why we should be delaying it until the end of September unless the weather is warmer. If that is the case we could start at the beginning of September.

Tree training not only involves light and heavy pruning but also tree tying and skirting.

2- Production

This type of pruning is performed on mature trees once they have reached full size. It has the aim of balancing the tree to obtain uniform and constant production every year.

As we know when trees are young there is a larger number of non-productive branches and that is because those branches are actively growing, but once they have reached their potential, they stop growing and start producing fruits, after a while, those branches are exhausted and they stop producing, therefore they should be removed, to encourage new growth and renew the tree.

If bloom is light, pruning can be confined to non-productive parts of the tree, preserving as much bloom and potential crop as possible. In years of heave bloom, pruning can be more severe without excessive crop removal.

Time of pruning: bud break until early December.

3- After Harvest (Cleaning)

More:

• Marcelo Berlanda
• Mechanical Pruning
• Mechanical Harvesting