The Large Buggy is a top-of-the-line mechanical harvester, equipped with either a 90 or 103 kW FPT engine Stage V (Fiat Powertrain Technologies). It stands out with its independent 3-wheel drive and rear steering wheel, allowing for exceptional maneuverability in tight spaces. This versatile machine is suitable for harvesting various fruits, including olives, nuts, and sour cherries.

Approved by the Italian Ministry of Transport and Navigation, it meets the requirements for Industry 4.0 incentives.

The Large Buggy can be customised with various features and attachments, such as a standard, overturning, or telescopic arm, a hydraulic lever distributor, and a rear camera with a monitor. Outside of harvest season, the drive unit can be paired with different devices, such as pruning bars and forks.

Please ask about the configuration you need?



TECHNICAL CHARACTERISTICS
Large Buggy 1.25 without Reverse Umbrella

• Engine: Iveco FPT Turbo Inter. 4500 cc., 93 kW (126 HP), 4 cylinders, water cooled
• Chassis: monoblock in tubulars and sheets, open cabin with roll-bars
• Transmission: hydrostatic, independent 3-wheel drive, rear wheel steering
• Braking system: hydraulic in negative
• Controls: steering wheel, motion pedal, joystick vibration, service hydraulic lever distributor
• Hydraulic circuit: closed hydraulic circuit with 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves
• Vibrating head: New Generation L214 (max opening 60 cm) at high frequencies, self-centring, self-braking, two vibrating speeds
• Tires: Mitas 405 x 70 x 20"

Size & Weight

• Total length: 5.850 mm (overturned arm), 7.700 mm (closed and in work position arm)
• Max width: 2.200 mm
• Machine max height: 1.850 mm
• Distance jaw-center wheel: 3.940 mm
• Hydraulic extension of the arm: 1.000 mm (+1000 mm triplex)
• Head max height: 5.300 mm - 3.750 mm (head in horizontal)
• Total weight: 5.415 kg

Umbrella Optionals:

• Electro-hydraulic joystick
• Triplex arm double extension type umbrella (locked if umbrella is coupled)
• Closure pressure jaw valve

Note: On this version, it is not possible to couple the reverse umbrella unless it was ordered.

__________

Large Buggy 1.25 with Reverse Umbrella

Technical Characteristics:

• Engine: Diesel, Iveco FPT Turbo Inter. 4500 cc., 93 kW (126 HP), 4 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic, independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation L214 (max opening 60 cm) at high frequencies, self-centering, self-braking. Two vibrating speeds
• Reverse umbrella: Ø 5, 6, 7, 8, 9 (Max Ø 9 m with extensions of ½)
• Tires: Mitas 405 x 70 x 20 inches

Size & Weight

• Total Length: 7.350 mm
• Max Width: 2.300 mm
• Machine max height: 1.850 mm
• Head Max Height: 700 mm (work pos.) – 2.200 (jaw extremity)
• Max unloading height: 2.400 mm
• Distance jaw-centerwheel: 2.750 mm
• Total weight: 6.150 kg
• Case capacity: 400 kg

Optionals

• Hydraulically tilting reverse umbrella (with cylinders)
• Triplex arm double extension type umbrella (no overturning and locked if umbrella is coupled)
• Electro-hydraulic joystick
• Umbrella bar extensions (½ m on Ø 8 m - 1 m on the others)
• Closure pressure jaw valve

_________

Large Buggy 1.4 without Reverse Umbrella

Technical Characteristics:

• Engine: Diesel, Iveco FPT Turbo Inter. 6700 cc., 107 kW (145 HP), 6 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic, independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation L216 (max opening 65 cm) at high frequencies, self-centring, self-braking. Two vibrating speeds
• Tires: BKT – Front 440 65 R24 - Rear 440 65 R20

*** NOTE:   On this version, it is not possible to couple the reverse umbrella unless it has been predisposed at the time of ordering.

Size and weight:

• Total Length: 5.850 mm (overturned) – 7.700 (closed arm in work pos.)
• Max Width: 2.200 mm
• Machine max height: 1.850 mm
• Head Max Height: 5.300 mm (jaw extremity) – 3.750 mm (head in horizontal)
• Distance jaw-centerwheel: 3.947 mm
• Hydraulic extension of the arm: 1.000 mm (+ 1.000 mm triplex)
• Total weight: 5.980 kg

Options

• Triplex arm double extension type umbrella (locked and no overturning if umbrella is coupled)
• Electro-hydraulic joystick
• Closure pressure jaw valve

_____________

Large Buggy 1.4 with Reverse Umbrella

Technical Characteristics:

• Engine: Diesel, Iveco FPT Turbo Inter. 6700 cc., 107 kW (145 HP), 6 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic, independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation L216 (max opening 65 cm) at high frequencies, self-centring, self-braking. Two vibrating speeds
• Tires: BKT – Front 440 65 R24 - Rear 440 65 R20
• Reverse umbrella: Ø 5, 6, 7, 8, 9 (max Ø 9 m with extensions of ½)

Size & Weight

• Total Length: 7.350 mm
• Max Width: 2.300 mm
• Machine max height: 1.850 mm
• Head Max Height: 700 mm (work pos.) – 2.200 (jaw extremity)
• Max unloading height: 2.400 mm
• Distance jaw-centre-wheel: 2.750 mm
• Hydraulic extension of the arm: 1.000 mm (+1.000 mm triplex)
• Total weight: 6.730 kg
• Case capacity: 400 kg

Optionals

• Hydraulically tilting reverse umbrella (with cylinders)
• Triplex arm double extension type umbrella (locked and no overturning if umbrella is coupled)
• Electro-hydraulic joystick
• Umbrella bar extensions (½ m on Ø 8 m - 1 m on others)
• Closure pressure jaw valve (Cod. 2729)

_____________

Large Buggy 1.4 2XL217 (without Reverse Umbrella)

Technical Characteristics:

• Engine: Diesel, Iveco FPT Turbo Inter. 6700 cc., 107 kW (145 HP), 6 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic with independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed hydraulic circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation L217 (max opening 90 cm) at high frequencies, self-centring, self-braking. Two vibrating speeds
• Tires: BKT – Front 440 65 R24 - Rear 440 65 R20

NOTE:  On this version it is not possible to couple the reverse umbrella (if not predisposed at order)​

Size & Weight

• Total Length: 5.850 mm (overturned) – 7.700 (closed arm in work pos.)
• Max Width: 2.200 mm
• Machine max height: 1.850 mm
• Head Max Height: 5.300 mm (jaw extremity) – 3.750 mm (head in horizontal)
• Distance jaw-centerwheel: 3.947 mm
• Hydraulic extension of the arm: 1.000 mm (+1.000 mm triplex)
• Total weight: 6.190 kg

Optionals

• Electro-hydraulic joystick
• Closure pressure jaw valve

_____________

Large Buggy 1.4 2XL217 with Reverse Umbrella

Technical Characteristics:

• Engine: Diesel, Iveco FPT Turbo Inter. 6700 cc., 107 kW (145 HP), 6 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic, independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation L217 (max opening 90 cm) at high frequencies, self-centring, self-braking. Two vibrating speeds
• Tires: BKT – Front 440 65 R24 - Rear 440 65 R20
• Reverse umbrella: Ø 5, 6, 7, 8, 9 (Max Ø 9 m with extensions of ½)

Size & Weight

• Total Length: 7.350 mm
• Max Width: 2.300 mm
• Machine max height: 1.850 mm
• Head Max Height: 700 mm (work pos.) – 2.200 (jaw extremity)
• Max unloading height: 2.400 mm
• Distance jaw-centerwheel: 2.750 mm
• Hydraulic extension of the arm: 1.000 mm (+ 1.000 mm triplex)
• Total weight: 6.940 kg
• Case capacity: 400 kg

Optionals

• Hydraulically tilting reverse umbrella (with cylinders)
• Electro-hydraulic joystick
• Umbrella bar extensions (½ m on Ø 8 m - 1 m on others)

_____________

Large Buggy 1.4 3XL Head

Technical Characteristics: 

• Engine: Diesel, Iveco FPT Turbo Inter. 6700 cc., 107 kW (145 HP), 6 cylinders, water cooled
• Chassis: Monoblock in tubulars and sheets. Open cabin with roll-bars
• Transmission: Hydrostatic, independent 3-wheel drive. The rear wheel steers
• Braking system: Hydraulic in negative
• Controls: Steering wheel, motion pedal, joystick vibration. Service hydraulic lever distributor
• Hydraulic circuit: Closed circuit composed by 4 pumps (transmission tandem, vibration, services, power steering) and electro-hydraulic valves.
• Vibrating Head: New Generation 3XL (max opening 1080 mm) with 3 independent jaws, self-centring, self-braking. Two vibrating speeds
• Tires: BKT – Front 440 65 R24 - Rear 440 65 R20

NOTE:  Reverse umbrella is not possible on this model

Size & Weight

• Total Length: 7.700 mm (closed arm in work position)
• Max Width: 2.300 mm
• Machine max height: 1.850 mm
• Head Max Height: 5.300 mm (jaw extremity) – 3.750 mm (head in horizontal)
• Distance jaw-centrewheel: 3.947 mm
• Hydraulic extension of the arm: 1.000 mm
• Total weight: 6.830 kg

Optionals

• Electro-hydraulic joystick 

_____________

About Vibrating Shaking Heads

Head type	Max opening	Total Weight	Rubber pillow length
S-212	450	310	400
M-213	550	380	500
L-214	600	510	500
XL-216	650	560	600
2XL-217	900	900	700
3XL	>1000	1300