C30 Hansa Chipper PTO

Call for Price
  • Description
  • Enquiry
See a video of the Hansa (C7)

The powerful hydraulic feed system of the Model C30 makes it easy to process any material. Its 6½” x 12” wide feed opening pulls bushy and twisted branches with forks into the machine without effort. You simply control the feed rate with the control bar and the rest is automatic with an optional electronic automatic sensor feed system. This heavy duty chipper is designed for use by full time arborists, contractors, hire centres, parks and local bodies.

Model C30 now has the option of being powered by petrol or diesel engines or tractor mounted PTO driven.

Fuel efficiency is vastly increased by 50% with the 28.6HP Lombardini two cylinder air cooled diesel engine. With the 40% higher torque of this engine, wide feed opening and the option of auto sensor feed system, this machine has no problems chipping a full length 6” branch with all side branches attached.


  • Wide infeed opening - 300 x 160mm (12” x 6½”). For foliage and brushy material, this wide infeed opening gives the chipper a capacity of a 10” to 12” machine with all the advantages of a 6” machine, e.g. Low weight and cost, and easy to manouvre
  • Vertical anvil - Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by stones and grit. This results in blade life being increased dramatically.
  • Hydraulic pump - Directly connected to the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material. Infinitely variable speed.
  • Clutch - Manual clutch system for no load starting of the engine. Engine is pivoted for engagement. Simple and reliable.
  • Outlet - 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
  • Jockey wheel - pneumatic wheel, height adjustable.
  • Light System - 12 volt for tail, brake and licence plate.
  • Feed roller - Pivot type spring tensioned, operates with less friction, moves forward and up to within 90mm of knives.
  • Feed control bar - Pull to feed, push for reverse. Speed is infinitely variable.
  • Auto sensor feed - Electronically monitors engine RPM and controls feed roller to suit. (optional)
  • Feed table - Folds away and is locked when transporting the machine.
  • Adjustable towbar - When operating, the machine can be moved closer to the truck. When towing, the towbar is extended for easy backing and manoeuvering of machine (not standard on diesel machine).